• Электробайк Charger mid drive
  • Электровелосипед Charger mid drive
  • Электровелосипед Charger MD
  • Электровелосипед ChargerMD

Charger MD — central motor electric bicycle

Charger MD electric bicycle series are based on modular locally developed laser-cut steel frame. This model stands for mid drive motor, lower unsprung weight and higher torque. It's suitable for agressive riding with jumps, road or offroad. 

This electric bike gives it's ovner maximum freedom. It can be comfortable long range city commuter as well as recreational offroad explorer. You can trensport the bike via railway or a car thanks to it's relatively low weight  (around 45 kg).

The battery

We put lots of effort to make really powerful and reliable battery using latest large capacity lithium NMC cells from electric car industry. Battery's expected lifetime range is more then 50 000 km. 

Range

Bike range for 1.6 kWh battery, depended on speed:

Up to 160 km on 25 km/h, with pedals

Up to 80 km on 45 km/h, throttle only

Up to 50 km on 60 km/h, throttle only

Battery tech specs

Energy stored: 1620 Wh / up to 3024 Wh upgraded

Nominal voltage: 60v / 72v upgraded

Capacity: 27Ah / 42Ah

Chemistry: Li-NMC

Lifetime: 80% capacity after 1000 cycles

Charger: 5A, 5-6 hours / 10A, 3 hours optional

Мощный электровелосипед Charger MD

Mid drive motor for agressive riders

The motor

Central motor (mid drive)

Power: 3000W (check out your local regulations)

Max speed: up to 60 km/h 

Requires general transmission maintaince 

Controls

You can directly control motor power with a standard throttle. 
There is 3-position switch for power levels, adjustable via APP.
Regenerative breaking turns on through break leaver sensors, which also cuts off motor power.
There is cruise control function.

Приложение для электробайка Charger

 

Display 

Battery charge level, speedometer, odometer are displayed on your mobile phone via special APP. Using this app, you can also adjust other controller settings, such as regen strength, soft start, 3-position switch and more.

 


Pedals

Why would you need pedals with 3000w motor? Here is why:

• Using pedals, you can comfortably extend your range up to 4 tumes.
• If you run out of charge, you don't have to walk home or call bike transporter. Just pedal as normal bicycle.
• You are cyclist and can use bicycle paths and other infrastructure, while pedaling, according with your local regulations. 

Электровелосипед с центральным мотором Charger MD

Запас энергии в раме электробайка!

The frame

Charger MD is assembled using modular, locally developed high presicion laser-cut steel frame.

Dual suspension with adjustable rear shocks mount, using high quality and lightweight bicycle parts. DNM rear shocks with preload-rebound adjustments, front fork with preload-rebound adjustments

Wheel size is 24x3, bicycle type, double wall rims

Break system: front and rear hudraulic bicycle breaks with 203 mm rotors


Comfortable dual suspension

Lifehacks

You can store Charger bike as normal bicycle in your house or flat. 

Bike can fit in normal elevator. You can set bike on rear wheel using rear breaks or throttle  (with some training). 

You can put in in most cars with front wheel detached. 

You can transport Charger bike in most railways  (not subways).

Made in Russia

Charger MD is assembled by hand in Moscow, Russia. We also offer tech support and local warranty / post warranty service.

 

Colour: black. You can also order any color in advance.

Charger bike on Facebook

Configuration

Controller BT module + APP

On/off key lock

LED lights

Kickstand

20х4» or 24х3» wheel size

Extras 

USB [$30]

Fenders [$50]

GPS tracker module [$50]

Road package  (rear view mirrors, turning lights, horn, stop signal) [$80]

Battery upgrade 1: 60v, 42Ah, + 50% range [$250]

Battery upgrade 2: 72v, 42Ah, + 90% range and +25% power [$500]

Fork upgrade DNM USD-8 [$200].

Rear shocks upgrade DNM burner [$100]

Warranty 12 month in Moscow.